JWE CARBIDE CO., LTD.
Specialized in Tungsten Carbide Products，Aim to Build a World-Renowned Brand.
Add to Cart
Carbide Nozzles are an excellent choice for manufacturing ferrous metal rod size wires and relatively short production and trial runs. Cemented carbide blanks have extremely high density, hardness and strength. There are round wire drawing dies of 0.1 mm (.004 inch) or a larger size to choose from.
Features:
Faster speed: Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. The special shape inside the nozzle — made possible by Dyze Design’s machining and manufacturing techniques — improves the flow where the diameter tapers, thus allowing a faster flow rate.
Low friction: The whole nozzle is electroless nickel plated for enhanced slippery properties. Plastic will slide on the nozzle instead of sticking to it. This results in cleaner parts and fewer issues from drag.
Advantage
▪ High hardness
▪ good thermal conductivity
▪ corrosion resistance, impact resistance
▪ low coefficient of friction
Application
▪ tungsten carbide die
▪ Natural diamond wire cutting
▪ Single crystal diamond mold
▪ PCD drawing die
▪ High crystalline diamond wire drawing die
Grades and Properties
| Grade | Density(g/cm3) | Hardness(HRA) | TRS(MPa) |
| YG6X | 14.95 | 91.5 | 1800 |
| YG6 | 14.95 | 90.5 | 1900 |
| YG8 | 14.8 | 89.5 | 2200 |
| YG10 | 14.5 | 88.5 | 2400 |
| YG15 | 14.0 | 87.0 | 2800 |
Performance Chart
Product Packaging
Company Introduction